Cooler Master MasterBox NR200P | Mini Tower | Gaming Cabinet – White

HIGHLIGHTS: Cooler Master MasterBox NR200P Cabinet

Cabinet Type – Mini-Tower

Motherboard Support – Mini-ITX, Mini-DTX

I/O Panel – 2x USB 3.2 Gen 1 Type-A

GFX Clearance – L:330mm, H:156mm, W:60mm

Pre-installed Fan – 2x 120 mm 650-1800 RPM PWM

ABOUT Cooler Master MasterBox NR200P Cabinet

The Cooler Master Masterbox NR200P uses features normally found in stylish, high-end ATX cases and cleverly uses space-saving measures to make the chassis less than half the volume. Each feature is thoughtfully placed in an 18-liter space to maximize component compatibility, thermal efficiency, and ease of assembly. Keep cool with highly ventilated side panels, or look cooler with crystal-clear tempered glass panels; Both are included to meet performance and style preferences. Fit larger graphics cards into the 3-slot capable NR200P, or use the two vertical card slots with the included PCI riser to power the graphics card and heads, making the GPU the centerpiece of the PC. Seven possible fan mounts, ample ventilation, and generous liquid and air-cooler clearance keep even the most powerful systems running at their optimum temperatures and speeds. The NR200P chassis frame is wrapped in sleek and tasteful powder-coated SGCC steel that makes a statement on a desk.

FEATURES:

1. Limited Size, Unlimited Options – The NR200P incorporates many of the features found in the larger ATX chassis while maintaining a space-efficient form factor. The NR200P comes with a choice of a vented steel side panel for unrestricted airflow, or a crystal-clear tempered glass side panel to reveal the beauty of a computing beast. A PCI riser is included for vertical GPU installation for better performance against the glass, or it is included with a vented panel to feed fresh air from the side.
2. Unrestricted Cooling Capacity – The NR200P can have a total of 7 fans for each cooling configuration. Two 120mm sick flow fans are included. The compact structure can efficiently house CPU coolers up to 155mm in length and radiators up to 280mm in length, so even the hottest running hardware can’t be held back.
3. Triple-slot GPU Support and Vertical Riser Cable included – Triple-slot GPUs are supported with a maximum length of 330 mm and a maximum width of 156mm, allowing large high-end graphics cards to fit. A custom-sized riser cable is included for mounting a graphics card vertically to a display or allowing the radiator to be mounted under the chassis to keep the system as cool as it looks.
4. Easy, Tool-Free Access – All exterior panels, including tempered glass and top-mounted fans, are secured with pins for easy removal, allowing quick access to the interior without the use of tools.
5. 360-Degree Accessibility – Every panel and frame part of the NR200P can be disassembled. Screws are used to secure frame parts to allow advanced disassembly and multiple angles to operate smoothly inside the chassis.
6. High-Quality Material – Thick, powder-coated SGCC steel keeps the chassis fit and finishes clean and durable, even under harsh travel conditions
7. Out-of-the-Box Custom Cooling Support – Two liquid cooling pump locations along with side and bottom radiator mounting locations allow for a powerful, custom water-cooled build inside a compact enclosure.
8. Multiple Motherboard Support Options – Compatible with Mini-ITX and Mini DTX. The PSU can be front-mounted for additional motherboard clearance, with a maximum space of 244 x 226 mm.
9. Sickleflow PWM Fan Included – Newly optimized blade design with an updated curve that provides the best balance between airflow and steady pressure to dissipate heat while remaining extremely cool.
10. Customization: 3D Printable Feet – During the design phase, we created many variants for the case foot design. After several iterations, the launch design was chosen, but we thought “why not share the iterations with our users?” The team unanimously agreed to this instruction. As a result, end users can 3D print a selection of different shapes and sizes, and even choose a color based on the filament they want to print from.
11. Customization: 3D Printable ATX PSU Bracket –
    Higher Position:
    Incompatible with a front-mounted top-mounted fan. 140 mm or 150 mm is recommended for maximum compatibility with GPUs longer than 240mm.
    Lower Position:
    Fully compatible with 2x 120 mm fans in the top panel.
    Maximum GPU Length Supported: 240mm

TECHNICAL SPECIFICATIONS

NOTE: Single-slot water-cooler GPUs or vertically mounted GPUs are recommended when using the bottom radiator position, this product is only compatible with devices that support the PCI-e 3.0 specification. If you use this product with a motherboard that supports PCI-e 4.0, please enter into the bios option and select PCI-e 3.0 before installation.